ORION › Game requirements › Ghostwire: Tokyo
Can you run Ghostwire: Tokyo? PC requirements and settings
Ghostwire: Tokyo, by Tango Gameworks (Action), came out on Steam on March 24, 2022.
Here are the official specs, and what they mean on the most common graphics cards.
Publisher's recommended cardGTX1080 / RX5600XT / Arc A750* (VRAM 6GB or higher)
Minimum cardGTX1060 / RX5500XT / Arc A380* (VRAM 6GB or higher)
Recommended RAM16 GB
Our conservative estimate60 fps at 1080p, high settings, with a GeForce RTX 3060
Estimate per graphics card
Which settings to aim for with your card
For each card: the highest settings level that stays smooth, and the expected frame-rate
range. This is a conservative estimate worked out from the publisher's recommended specs, not a
measurement: your processor, drivers and game updates move it.
Without DLSS, FSR or frame generation: turning them on raises the frame rate noticeably
when the game offers them.
Best settings
Best graphics settings for Ghostwire: Tokyo by graphics card
The setting ORION's “Recommended” profile would pick to play at 60 frames per second: the
best-looking detail level that stays smooth, with upscaling when it lets you go one step up (DLSS
on GeForce RTX, XeSS on Intel Arc, FSR on other cards). If Ghostwire: Tokyo doesn't offer it, use the
level from the previous table.
| Graphics card | 1080p | 1440p |
| GeForce RTX 5070 | High116–159 fps | High75–103 fps |
| GeForce RTX 4070 | High101–139 fps | High66–90 fps |
| Radeon RX 7800 XT | High110–152 fps | High72–99 fps |
| GeForce RTX 4060 Ti | High79–109 fps | High + DLSS Quality68–94 fps |
| GeForce RTX 3070 | High79–109 fps | High + DLSS Quality68–94 fps |
| Intel Arc B580 | High68–93 fps | High + XeSS Quality59–81 fps |
| GeForce RTX 4060 | High66–90 fps | High + DLSS Quality56–79 fps |
| Radeon RX 7600 | High64–88 fps | High + FSR Quality55–76 fps |
| GeForce RTX 3060 | High56–77 fps | Medium + DLSS Quality63–87 fps |
| Radeon RX 6600 | High + FSR Quality70–97 fps | Medium + FSR Quality59–82 fps |
| GeForce GTX 1660 Super | Medium + FSR Quality63–87 fps | Low + FSR Quality55–76 fps |
At these levels, ORION keeps textures on high from 8 GB of video memory (they cost memory,
hardly any frames), sets the frame cap on the target for steady pacing, turns off motion blur and
film grain, and leaves vertical sync off. This is a conservative estimate, not a measurement: in
ORION, the first measured session corrects the setting.
Official specs
Minimum and recommended requirements
Minimum
- OS
- 64bit Windows10 (version 1909 or higher)
- Processor
- Core i7 4770K @3.5ghz / Ryzen 5 2600
- Memory
- 12 GB RAM
- Graphics
- GTX1060 / RX5500XT / Arc A380* (VRAM 6GB or higher)
- DirectX
- Version 12
- Storage
- 26 GB
- Publisher's note
- SSD Storage, *Please check Intel's website for Arc compatible CPU and motherboard requirements.
Recommended
- OS
- 64bit Windows10 (version 1909 or higher)
- Processor
- Core i7 6700 @3.4ghz / Ryzen 5 2600
- Memory
- 16 GB RAM
- Graphics
- GTX1080 / RX5600XT / Arc A750* (VRAM 6GB or higher)
- DirectX
- Version 12
- Storage
- 26 GB
- Publisher's note
- SSD Storage, *Please check Intel's website for Arc compatible CPU and motherboard requirements.
Source: the
game's Steam page, read on October 7, 2026.
Where to buy
Buy Ghostwire: Tokyo
The official page first. In ORION, the Store tab compares prices across shops, with the
official stores listed before key resellers.
On your PC
The same estimate with your own hardware, and the settings applied for you
ORION is a free game launcher for Windows. It reads your graphics card, processor and
screen, estimates every game in your library, then measures the real frame rate while you
play and sets the game up with its "Recommended" profile. No account, no ads.
Questions
Ghostwire: Tokyo at a glance
Which graphics card do I need for Ghostwire: Tokyo at 1080p?
The publisher recommends: GTX1080 / RX5600XT / Arc A750* (VRAM 6GB or higher). By our conservative estimate, high settings hold 60 frames per second at 1080p with a GeForce RTX 3060, and a GeForce GTX 1660 Super gets there with lower settings.
What are the best graphics settings for Ghostwire: Tokyo on an RTX 4060?
For 60 frames per second at 1080p, ORION's “Recommended” profile would pick High settings: between 66 and 90 frames per second according to our conservative estimate.
Can I run Ghostwire: Tokyo on an RTX 3060?
By our estimate, a GeForce RTX 3060 runs Ghostwire: Tokyo at 1080p on high settings, between 56 and 77 frames per second.
Can I run Ghostwire: Tokyo on an RTX 4060?
By our estimate, a GeForce RTX 4060 runs Ghostwire: Tokyo at 1080p on high settings, between 66 and 90 frames per second.
How much RAM does Ghostwire: Tokyo need?
The publisher recommends 16 GB of RAM (minimum: 12 GB).
How much storage does Ghostwire: Tokyo take?
The official page asks for 26 GB of storage.
How are these estimates worked out?
The publisher's
recommended specs are the reference point (about 60 frames per second at 1080p on high
settings, unless the publisher says otherwise). Each card's power is compared with the
recommended card (the average when the publisher names several), then adjusted to the screen
resolution. A low margin is kept, and less video memory than recommended drops one level.
Other games
Check another game's requirements
By genre: Action games