ORION › Game requirements › NARAKA: BLADEPOINT
Can you run NARAKA: BLADEPOINT? PC requirements and settings
NARAKA: BLADEPOINT, by 24 Entertainment (Action, Adventure, Massively Multiplayer), came out on Steam on August 11, 2021.
Here are the official specs, and what they mean on the most common graphics cards.
Publisher's recommended cardNVIDIA GeForce GTX 1060 6G, Intel Arc A750, AMD RX480 or equivalent
Minimum cardNVIDIA GeForce GTX 750TI, Intel Arc A380, AMD HD 6950 or equivalent
Recommended RAM16 GB
Our conservative estimate60 fps at 1080p, high settings, with a Radeon RX 6600
Estimate per graphics card
Which settings to aim for with your card
For each card: the highest settings level that stays smooth, and the expected frame-rate
range. This is a conservative estimate worked out from the publisher's recommended specs, not a
measurement: your processor, drivers and game updates move it.
Without DLSS, FSR or frame generation: turning them on raises the frame rate noticeably
when the game offers them.
Best settings
Best graphics settings for NARAKA: BLADEPOINT by graphics card
The setting ORION's “Recommended” profile would pick to play at 60 frames per second: the
best-looking detail level that stays smooth, with upscaling when it lets you go one step up (DLSS
on GeForce RTX, XeSS on Intel Arc, FSR on other cards). If NARAKA: BLADEPOINT doesn't offer it, use the
level from the previous table.
| Graphics card | 1080p | 1440p |
| GeForce RTX 5070 | High148–204 fps | High96–132 fps |
| GeForce RTX 4070 | High130–179 fps | High84–116 fps |
| Radeon RX 7800 XT | High141–195 fps | High92–126 fps |
| GeForce RTX 4060 Ti | High101–139 fps | High66–90 fps |
| GeForce RTX 3070 | High101–139 fps | High66–90 fps |
| Intel Arc B580 | High87–119 fps | High56–77 fps |
| GeForce RTX 4060 | High84–116 fps | High + DLSS Quality72–101 fps |
| Radeon RX 7600 | High82–113 fps | High + FSR Quality71–98 fps |
| GeForce RTX 3060 | High72–99 fps | High + DLSS Quality62–86 fps |
| Radeon RX 6600 | High67–92 fps | High + FSR Quality58–81 fps |
| GeForce GTX 1660 Super | High + FSR Quality62–86 fps | Medium + FSR Balanced58–81 fps |
At these levels, ORION keeps textures on high from 8 GB of video memory (they cost memory,
hardly any frames), sets the frame cap on the target for steady pacing, turns off motion blur and
film grain, and leaves vertical sync off. This is a conservative estimate, not a measurement: in
ORION, the first measured session corrects the setting.
Official specs
Minimum and recommended requirements
Minimum
- OS
- Windows 10 64-bit or newer
- Processor
- Intel i5 4th generation or AMD FX 6300 or equivalent
- Memory
- 8 GB RAM
- Graphics
- NVIDIA GeForce GTX 750TI, Intel Arc A380, AMD HD 6950 or equivalent
- DirectX
- Version 11
- Storage
- 90 GB
- Publisher's note
- a) Can run at 720p/60fps; b) We advise you install the game on an SSD for a more streamlined experience.
Recommended
- OS
- Windows 10 64-bit
- Processor
- Intel i7 7th generation or equivalent
- Memory
- 16 GB RAM
- Graphics
- NVIDIA GeForce GTX 1060 6G, Intel Arc A750, AMD RX480 or equivalent
- DirectX
- Version 11
- Storage
- 90 GB
- Publisher's note
- a) Can run at 1080p/60fps; b) We advise you install the game on an SSD for a more streamlined experience.
Source: the
game's Steam page, read on October 7, 2026.
On your PC
The same estimate with your own hardware, and the settings applied for you
ORION is a free game launcher for Windows. It reads your graphics card, processor and
screen, estimates every game in your library, then measures the real frame rate while you
play and sets the game up with its "Recommended" profile. No account, no ads.
Questions
NARAKA: BLADEPOINT at a glance
Which graphics card do I need for NARAKA: BLADEPOINT at 1080p?
The publisher recommends: NVIDIA GeForce GTX 1060 6G, Intel Arc A750, AMD RX480 or equivalent. By our conservative estimate, high settings hold 60 frames per second at 1080p with a Radeon RX 6600, and a GeForce GTX 1060 gets there with lower settings.
What are the best graphics settings for NARAKA: BLADEPOINT on an RTX 4060?
For 60 frames per second at 1080p, ORION's “Recommended” profile would pick High settings: between 84 and 116 frames per second according to our conservative estimate.
Can I run NARAKA: BLADEPOINT on an RTX 3060?
By our estimate, a GeForce RTX 3060 runs NARAKA: BLADEPOINT at 1080p on high settings, between 72 and 99 frames per second.
Can I run NARAKA: BLADEPOINT on an RTX 4060?
By our estimate, a GeForce RTX 4060 runs NARAKA: BLADEPOINT at 1080p on high settings, between 84 and 116 frames per second.
How much RAM does NARAKA: BLADEPOINT need?
The publisher recommends 16 GB of RAM (minimum: 8 GB).
How much storage does NARAKA: BLADEPOINT take?
The official page asks for 90 GB of storage.
How are these estimates worked out?
The publisher's
recommended specs are the reference point (about 60 frames per second at 1080p on high
settings, unless the publisher says otherwise). Each card's power is compared with the
recommended card (the average when the publisher names several), then adjusted to the screen
resolution. A low margin is kept, and less video memory than recommended drops one level.