ORION › Game requirements › South Park: The Fractured But Whole

Can you run South Park: The Fractured But Whole? PC requirements and settings

South Park: The Fractured But Whole, by Ubisoft San Francisco (RPG), came out on Steam on October 16, 2017. Here are the official specs, and what they mean on the most common graphics cards.

Publisher's recommended cardNVIDIA GeForce GTX 670 / GTX 750ti / GTX 960 / GTX 1060 / AMD Radeon R9 280X / R9 380 / RX 470
Minimum cardNVIDIA GeForce GTX 560Ti / GTX 650 / GTX 750 / GTX 950 / GTX 1050 / AMD Radeon HD 7850 / R9 270 / R9 370 / RX 460
Recommended RAM6 GB
Our conservative estimate60 fps at 1080p, high settings, with a GeForce GTX 1060

Estimate per graphics card

Which settings to aim for with your card

For each card: the highest settings level that stays smooth, and the expected frame-rate range. This is a conservative estimate worked out from the publisher's recommended specs, not a measurement: your processor, drivers and game updates move it.

Graphics card1080p 1440p4K
GeForce RTX 5080 16 GBHighover 300 fpsHighover 295 fpsHigh160–221 fps
Radeon RX 9070 XT 16 GBHighover 300 fpsHighover 257 fpsHigh140–192 fps
GeForce RTX 5070 12 GBHighover 300 fpsHigh211–291 fpsHigh115–158 fps
GeForce RTX 4070 Super 12 GBHighover 300 fpsHigh211–291 fpsHigh115–158 fps
Radeon RX 7800 XT 16 GBHighover 300 fpsHigh201–277 fpsHigh109–151 fps
GeForce RTX 4070 12 GBHighover 285 fpsHigh185–254 fpsHigh100–138 fps
GeForce RTX 3080 10 GBHighover 280 fpsHigh181–250 fpsHigh99–136 fps
Radeon RX 9060 XT 16 GBHighover 233 fpsHigh151–208 fpsHigh82–113 fps
GeForce RTX 4060 Ti 8 GBHighover 222 fpsHigh144–199 fpsHigh78–108 fps
GeForce RTX 3070 8 GBHighover 222 fpsHigh144–199 fpsHigh78–108 fps
Radeon RX 6700 XT 12 GBHigh212–291 fpsHigh137–189 fpsHigh75–103 fps
GeForce RTX 5060 8 GBHigh206–284 fpsHigh134–184 fpsHigh73–100 fps
Intel Arc B580 12 GBHigh190–262 fpsHigh124–170 fpsHigh67–92 fps
GeForce RTX 4060 8 GBHigh185–255 fpsHigh120–165 fpsHigh65–90 fps
Radeon RX 7600 8 GBHigh180–247 fpsHigh117–160 fpsHigh63–87 fps
GeForce RTX 3060 12 GBHigh158–217 fpsHigh102–141 fpsHigh56–77 fps
Radeon RX 6600 8 GBHigh147–202 fpsHigh95–131 fpsMedium67–93 fps
GeForce RTX 2060 6 GBHigh119–164 fpsHigh77–106 fpsLow73–101 fps
GeForce GTX 1660 Super 6 GBHigh102–140 fpsHigh66–91 fpsLow63–87 fps
Radeon RX 580 8 GBHigh78–108 fpsMedium66–91 fpsLow48–67 fps
GeForce GTX 1060 6 GBHigh73–100 fpsMedium61–84 fpsLow45–62 fps

Without DLSS, FSR or frame generation: turning them on raises the frame rate noticeably when the game offers them.

Best settings

Best graphics settings for South Park: The Fractured But Whole by graphics card

The setting ORION's “Recommended” profile would pick to play at 60 frames per second: the best-looking detail level that stays smooth, with upscaling when it lets you go one step up (DLSS on GeForce RTX, XeSS on Intel Arc, FSR on other cards). If South Park: The Fractured But Whole doesn't offer it, use the level from the previous table.

Graphics card1080p1440p
GeForce RTX 5070Highover 300 fpsHigh211–291 fps
GeForce RTX 4070Highover 285 fpsHigh185–254 fps
Radeon RX 7800 XTHighover 300 fpsHigh201–277 fps
GeForce RTX 4060 TiHighover 222 fpsHigh144–199 fps
GeForce RTX 3070Highover 222 fpsHigh144–199 fps
Intel Arc B580High190–262 fpsHigh124–170 fps
GeForce RTX 4060High185–255 fpsHigh120–165 fps
Radeon RX 7600High180–247 fpsHigh117–160 fps
GeForce RTX 3060High158–217 fpsHigh102–141 fps
Radeon RX 6600High147–202 fpsHigh95–131 fps
GeForce GTX 1660 SuperHigh102–140 fpsHigh66–91 fps

At these levels, ORION keeps textures on high from 8 GB of video memory (they cost memory, hardly any frames), sets the frame cap on the target for steady pacing, turns off motion blur and film grain, and leaves vertical sync off. This is a conservative estimate, not a measurement: in ORION, the first measured session corrects the setting.

Official specs

Minimum and recommended requirements

Minimum

OS
Windows 8.1, Windows 10 (64-bit versions only)
Processor
Intel Core i5 2400 / AMD FX 4320 or equivalent
Memory
6 GB RAM
Graphics
NVIDIA GeForce GTX 560Ti / GTX 650 / GTX 750 / GTX 950 / GTX 1050 / AMD Radeon HD 7850 / R9 270 / R9 370 / RX 460
Storage
20 GB
Publisher's note
720p @~60FPS.

Recommended

OS
Windows 8.1, Windows 10 (64-bit versions only)
Processor
Intel Core i5-4690K / AMD FX-8350 or equivalent
Graphics
NVIDIA GeForce GTX 670 / GTX 750ti / GTX 960 / GTX 1060 / AMD Radeon R9 280X / R9 380 / RX 470
Storage
20 GB
Publisher's note
1080p @~60FPS.

Source: the game's Steam page, read on October 7, 2026.

Where to buy

Buy South Park: The Fractured But Whole

The official page first. In ORION, the Store tab compares prices across shops, with the official stores listed before key resellers.

On your PC

The same estimate with your own hardware, and the settings applied for you

ORION is a free game launcher for Windows. It reads your graphics card, processor and screen, estimates every game in your library, then measures the real frame rate while you play and sets the game up with its "Recommended" profile. No account, no ads.

Questions

South Park: The Fractured But Whole at a glance

Which graphics card do I need for South Park: The Fractured But Whole at 1080p?

The publisher recommends: NVIDIA GeForce GTX 670 / GTX 750ti / GTX 960 / GTX 1060 / AMD Radeon R9 280X / R9 380 / RX 470. By our conservative estimate, high settings hold 60 frames per second at 1080p with a GeForce GTX 1060.

What are the best graphics settings for South Park: The Fractured But Whole on an RTX 4060?

For 60 frames per second at 1080p, ORION's “Recommended” profile would pick High settings: between 185 and 255 frames per second according to our conservative estimate.

Can I run South Park: The Fractured But Whole on an RTX 3060?

By our estimate, a GeForce RTX 3060 runs South Park: The Fractured But Whole at 1080p on high settings, between 158 and 217 frames per second.

Can I run South Park: The Fractured But Whole on an RTX 4060?

By our estimate, a GeForce RTX 4060 runs South Park: The Fractured But Whole at 1080p on high settings, between 185 and 255 frames per second.

How much RAM does South Park: The Fractured But Whole need?

The publisher recommends 6 GB of RAM.

How much storage does South Park: The Fractured But Whole take?

The official page asks for 20 GB of storage.

How are these estimates worked out?

The publisher's recommended specs are the reference point (about 60 frames per second at 1080p on high settings, unless the publisher says otherwise). Each card's power is compared with the recommended card (the average when the publisher names several), then adjusted to the screen resolution. A low margin is kept, and less video memory than recommended drops one level.

Other games

Check another game's requirements

By genre: RPG games