ORION › Game requirements › S.T.A.L.K.E.R. 2: Heart of Chornobyl

Can you run S.T.A.L.K.E.R. 2: Heart of Chornobyl? PC requirements and settings

S.T.A.L.K.E.R. 2: Heart of Chornobyl, by GSC Game World (Action, Adventure, RPG), came out on Steam on November 20, 2024. Here are the official specs, and what they mean on the most common graphics cards.

Publisher's recommended cardNvidia GeForce RTX 3070 Ti / Nvidia GeForce RTX 4070 / AMD Radeon RX 6800 XT
Minimum cardNvidia GeForce GTX 1060 6GB / AMD Radeon RX 580 8GB / Intel Arc A750
Recommended RAM32 GB
Our conservative estimate60 fps at 1080p, high settings, with a Radeon RX 9070 XT

Estimate per graphics card

Which settings to aim for with your card

For each card: the highest settings level that stays smooth, and the expected frame-rate range. This is a conservative estimate worked out from the publisher's recommended specs, not a measurement: your processor, drivers and game updates move it.

Graphics card1080p 1440p4K
GeForce RTX 5080 16 GBHigh67–93 fpsMedium57–78 fpsLow41–57 fps
Radeon RX 9070 XT 16 GBHigh59–81 fpsLow67–92 fpsLow36–50 fps
GeForce RTX 5070 12 GBMedium63–86 fpsLow55–75 fpsLow30–41 fps
GeForce RTX 4070 Super 12 GBMedium63–86 fpsLow55–75 fpsLow30–41 fps
Radeon RX 7800 XT 16 GBMedium60–82 fpsLow52–72 fpsToo weakunder 30 fps
GeForce RTX 4070 12 GBMedium55–76 fpsLow48–66 fpsToo weakunder 30 fps
GeForce RTX 3080 10 GBLow73–100 fpsLow47–65 fpsToo weakunder 30 fps
Radeon RX 9060 XT 16 GBLow60–83 fpsLow39–54 fpsToo weakunder 30 fps
GeForce RTX 4060 Ti 8 GBLow58–79 fpsLow37–51 fpsToo weakunder 30 fps
GeForce RTX 3070 8 GBLow58–79 fpsLow37–51 fpsToo weakunder 30 fps
Radeon RX 6700 XT 12 GBLow55–76 fpsLow35–49 fpsToo weakunder 30 fps
GeForce RTX 5060 8 GBLow53–74 fpsLow35–48 fpsToo weakunder 30 fps
Intel Arc B580 12 GBLow49–68 fpsLow32–44 fpsToo weakunder 30 fps
GeForce RTX 4060 8 GBLow48–66 fpsLow31–43 fpsToo weakunder 30 fps
Radeon RX 7600 8 GBLow46–64 fpsLow30–41 fpsToo weakunder 30 fps
GeForce RTX 3060 12 GBLow41–56 fpsToo weakunder 30 fpsToo weakunder 30 fps
Radeon RX 6600 8 GBLow38–52 fpsToo weakunder 30 fpsToo weakunder 30 fps
GeForce RTX 2060 6 GBLow31–42 fpsToo weakunder 30 fpsToo weakunder 30 fps
GeForce GTX 1660 Super 6 GBToo weakunder 30 fpsToo weakunder 30 fpsToo weakunder 30 fps
Radeon RX 580 8 GBToo weakunder 30 fpsToo weakunder 30 fpsToo weakunder 30 fps
GeForce GTX 1060 6 GBToo weakunder 30 fpsToo weakunder 30 fpsToo weakunder 30 fps

Without DLSS, FSR or frame generation: turning them on raises the frame rate noticeably when the game offers them.

Best settings

Best graphics settings for S.T.A.L.K.E.R. 2: Heart of Chornobyl by graphics card

The setting ORION's “Recommended” profile would pick to play at 60 frames per second: the best-looking detail level that stays smooth, with upscaling when it lets you go one step up (DLSS on GeForce RTX, XeSS on Intel Arc, FSR on other cards). If S.T.A.L.K.E.R. 2: Heart of Chornobyl doesn't offer it, use the level from the previous table.

Graphics card1080p1440p
GeForce RTX 5070High + DLSS Quality64–89 fpsMedium + DLSS Quality55–75 fps
GeForce RTX 4070High + DLSS Quality56–78 fpsLow + DLSS Quality64–89 fps
Radeon RX 7800 XTHigh + FSR Quality62–85 fpsMedium + FSR Balanced58–79 fps
GeForce RTX 4060 TiMedium + DLSS Quality58–79 fpsLow + DLSS Balanced55–76 fps
GeForce RTX 3070Medium + DLSS Quality58–79 fpsLow + DLSS Balanced55–76 fps
Intel Arc B580Medium + XeSS Balanced55–75 fpsLow + XeSS Balancedcapped at 50 fps
GeForce RTX 4060Low + DLSS Quality64–89 fpsLow + DLSS Balancedcapped at 50 fps
Radeon RX 7600Low + FSR Quality62–86 fpsLow + FSR Performancecapped at 50 fps
GeForce RTX 3060Low + DLSS Quality55–75 fpsLow + DLSS Balancedcapped at 40 fps
Radeon RX 6600Low + FSR Balanced57–78 fpsLow + FSR Performancecapped at 40 fps
GeForce GTX 1660 SuperLow + FSR Balancedcapped at 40 fpsLow + FSR Performancecapped at 30 fps

At these levels, ORION keeps textures on high from 8 GB of video memory (they cost memory, hardly any frames), sets the frame cap on the target for steady pacing, turns off motion blur and film grain, and leaves vertical sync off. This is a conservative estimate, not a measurement: in ORION, the first measured session corrects the setting.

Official specs

Minimum and recommended requirements

Minimum

OS
Windows 10 x64 / Windows 11 x64
Processor
Intel Core i7-7700K / AMD Ryzen 5 1600X
Memory
16 GB RAM
Graphics
Nvidia GeForce GTX 1060 6GB / AMD Radeon RX 580 8GB / Intel Arc A750
Storage
160 GB
Publisher's note
Graphics Preset: LOW / Resolution: 1080p / Target FPS: 30.

Recommended

OS
Windows 10 x64 / Windows 11 x64
Processor
Intel Core i7-11700 / AMD Ryzen 7 5800X
Memory
32 GB RAM
Graphics
Nvidia GeForce RTX 3070 Ti / Nvidia GeForce RTX 4070 / AMD Radeon RX 6800 XT
Storage
160 GB
Publisher's note
Graphics Preset: HIGH / Resolution: 1440p / Target FPS: 60.

Source: the game's Steam page, read on October 7, 2026.

Where to buy

Buy S.T.A.L.K.E.R. 2: Heart of Chornobyl

The official page first. In ORION, the Store tab compares prices across shops, with the official stores listed before key resellers.

On your PC

The same estimate with your own hardware, and the settings applied for you

ORION is a free game launcher for Windows. It reads your graphics card, processor and screen, estimates every game in your library, then measures the real frame rate while you play and sets the game up with its "Recommended" profile. No account, no ads.

Questions

S.T.A.L.K.E.R. 2: Heart of Chornobyl at a glance

Which graphics card do I need for S.T.A.L.K.E.R. 2: Heart of Chornobyl at 1080p?

The publisher recommends: Nvidia GeForce RTX 3070 Ti / Nvidia GeForce RTX 4070 / AMD Radeon RX 6800 XT. By our conservative estimate, high settings hold 60 frames per second at 1080p with a Radeon RX 9070 XT, and a Radeon RX 6700 XT gets there with lower settings.

What are the best graphics settings for S.T.A.L.K.E.R. 2: Heart of Chornobyl on an RTX 4060?

For 60 frames per second at 1080p, ORION's “Recommended” profile would pick Low + DLSS Quality settings: between 64 and 89 frames per second according to our conservative estimate.

Can I run S.T.A.L.K.E.R. 2: Heart of Chornobyl on an RTX 3060?

By our estimate, a GeForce RTX 3060 runs S.T.A.L.K.E.R. 2: Heart of Chornobyl at 1080p on low settings, between 41 and 56 frames per second.

Can I run S.T.A.L.K.E.R. 2: Heart of Chornobyl on an RTX 4060?

By our estimate, a GeForce RTX 4060 runs S.T.A.L.K.E.R. 2: Heart of Chornobyl at 1080p on low settings, between 48 and 66 frames per second.

How much RAM does S.T.A.L.K.E.R. 2: Heart of Chornobyl need?

The publisher recommends 32 GB of RAM (minimum: 16 GB).

How much storage does S.T.A.L.K.E.R. 2: Heart of Chornobyl take?

The official page asks for 160 GB of storage.

How are these estimates worked out?

The publisher's recommended specs are the reference point (about 60 frames per second at 1080p on high settings, unless the publisher says otherwise). Each card's power is compared with the recommended card (the average when the publisher names several), then adjusted to the screen resolution. A low margin is kept, and less video memory than recommended drops one level.

Other games

Check another game's requirements

By genre: Action games · Adventure games · RPG games